SMC Networks TigerSwitch SMC6128L2 User Manual

C ONFIGURING THE S WITCH
3-122
CLI – The following example configures LACP parameters for ports 1-6.
Ports 1-4 are used as active members of the LAG; ports 5 and 6 are set to
backup mode.
Displaying LACP Port Counters
You can display statistics for LACP protocol messages.
Counter Information
Console(config)#interface ethernet 1/1 4-144
Console(config-if)#lacp actor system-priority 3 4-167
Console(config-if)#lacp actor admin-key 120 4-168
Console(config-if)#lacp actor port-priority 128 4-170
Console(config-if)#exit
.
.
.
Console(config)#interface ethernet 1/6
Console(config-if)#lacp actor system-priority 3
Console(config-if)#lacp actor admin-key 120
Console(config-if)#lacp actor port-priority 512
Console(config-if)#end
Console#sh lacp sysid 4-171
Channel Group System Priority System MAC Address
-------------------------------------------------------------------
1 32768 00-00-E9-31-31-31
2 32768 00-00-E9-31-31-31
3 32768 00-00-E9-31-31-31
4 32768 00-00-E9-31-31-31
5 32768 00-00-E9-31-31-31
6 32768 00-00-E9-31-31-31
Console#show lacp 1 internal 4-171
Channel group : 1
-------------------------------------------------------------------
Oper Key : 120
Admin Key : 120
Console#
Table 3-8. LACP Port Counter Information
Field Description
LACPDUs Sent Number of valid LACPDUs transmitted from this
channel group.
LACPDUs Receive Number of valid LACPDUs received on this channel
group.
Marker Sent Number of valid Marker PDUs transmitted from this
channel group.

SMC Networks TigerSwitch SMC6128L2 Specifications

General

Brand	SMC Networks
Model	TigerSwitch SMC6128L2
Category	Switch
Language	English