EasyManuals Logo

SMC Networks TigerSwitch SMC6128L2 User Manual

SMC Networks TigerSwitch SMC6128L2
606 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #242 background imageLoading...
Page #242 background image
C
ONFIGURING
THE
S
WITCH
3-188
priorities are defined in IEEE 802.1p. The default priority levels are
assigned according to recommendations in the IEEE 802.1p standard as
shown in the following table.
The priority levels recommended in the IEEE 802.1p standard for various
network applications are shown in the following table. However, you can
map the priority levels to the switch’s output queues in any way that
benefits application traffic for your own network.
Command Attributes
• Interface – Select port or trunk identifier.
• Priority – CoS value. (Range: 0-7, where 7 is the highest priority)
• Traffic Class* – Output queue buffer. (Range: 0-3, where 3 is the
highest CoS priority queue)
* CLI shows Queue ID.
Table 3-12. Egress Queue Priority Mapping
Queue 0123
Priority 1,2 0,3 4,5 6,7
Table 3-13. CoS Priority Levels
Priority Level Traffic Type
1Background
2(Spare)
0 (default) Best Effort
3 Excellent Effort
4 Controlled Load
5 Video, less than 100 milliseconds latency and jitter
6 Voice, less than 10 milliseconds latency and jitter
7 Network Control

Table of Contents

Other manuals for SMC Networks TigerSwitch SMC6128L2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SMC Networks TigerSwitch SMC6128L2 and is the answer not in the manual?

SMC Networks TigerSwitch SMC6128L2 Specifications

General IconGeneral
BrandSMC Networks
ModelTigerSwitch SMC6128L2
CategorySwitch
LanguageEnglish

Related product manuals