C
ONFIGURING
THE
S
WITCH
3-246
Cluster Candidate Information
Displays information about discovered switches in the network that are
already cluster Members or are available to become cluster Members.
Command Attributes
•Clear – Click the Clear button to clear the cluster candidate table.
• Role – Indicates the current status of Candidate switches in the
network.
• MAC Address – The MAC address of the Candidate switch.
• Description – The system description string of the Candidate switch.
Web – Click Cluster, Candidate Information.
Figure 3-117. Cluster Candidate Information
CLI – This example shows information about cluster Candidate switches.
Vty-0#show cluster candidates 4-284
Cluster Candidates:
Role Mac Description
--------------- -----------------
-----------------------------------------
ACTIVE MEMBER 00-12-cf-23-49-c0 24/48 L2/L4 IPV4/IPV6 GE Switch
CANDIDATE 00-12-cf-0b-47-a0 24/48 L2/L4 IPV4/IPV6 GE Switch
Vty-0#
To Next Page
Loading...
Need help?
General
