SMC Networks TigerSwitch SMC6128L2

C OMMAND L INE I NTERFACE
4-98
radius-server timeout
This command sets the interval between transmitting authentication
requests to the RADIUS server. Use the no form to restore the default.
Syntax
radius-server timeout number_of_seconds
no radius-server timeout
number_of_seconds - Number of seconds the switch waits for a reply
before resending a request. (Range: 1-65535)
Default Setting
5
Command Mode
Global Configuration
Example
show radius-server
This command displays the current settings for the RADIUS server.
Default Setting
None
Command Mode
Privileged Exec
Example
Console(config)#radius-server timeout 10
Console(config)#
Console#show radius-server
Remote RADIUS server configuration:
Global settings:
Communication key with RADIUS server:
Server port number: 1812
Retransmit times: 2
Request timeout: 5
Console#