SMC Networks TigerSwitch SMC6128L2

C OMMAND L INE I NTERFACE
4-128
string - String that describes the system contact information.
(Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Related Commands
snmp-server location (4-128)
snmp-server location
This command sets the system location string. Use the no form to remove
the location string.
Syntax
snmp-server location text
no snmp-server location
text - String that describes the system location.
(Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Related Commands
snmp-server contact (4-127)
Console(config)#snmp-server contact Paul
Console(config)#
Console(config)#snmp-server location WC-19
Console(config)#