SMC Networks TigerSwitch SMC6128L2 User Manual

C OMMAND L INE I NTERFACE
4-242
IGMP Filtering and Throttling Commands
In certain switch applications, the administrator may want to control the
multicast services that are available to end users. For example, an IP/TV
service based on a specific subscription plan. The IGMP filtering feature
fulfills this requirement by restricting access to specified multicast services
on a switch port and IGMP throttling limits the number of simultaneous
multicast groups a port can join.
Table 4-69 IGMP Filtering and Throttling Commands
Command Function Mode Page
ip igmp filter Enables IGMP filtering and throttling on
the switch
GC 4-243
ip igmp profile Sets a profile number and enters IGMP
filter profile configuration mode
GC 4-244
permit, deny Sets a profile access mode to permit or
deny
IPC 4-244
range Specifies one or a range of multicast
addresses for a profile
IPC 4-245
ip igmp filter Assigns an IGMP filter profile to an
interface
IC 4-246
ip igmp max-groups Specifies an IGMP throttling number for
an interface
IC 4-247
ip igmp max-groups
action
Sets the IGMP throttling action for an
interface
IC 4-248
show ip igmp filter Displays the IGMP filtering status PE 4-248
show ip igmp
profile
Displays IGMP profiles and settings PE 4-249
show ip igmp
throttle interface
Displays the IGMP throttling setting for
interfaces
PE 4-250

SMC Networks TigerSwitch SMC6128L2 Specifications

General

Brand	SMC Networks
Model	TigerSwitch SMC6128L2
Category	Switch
Language	English