C
ONFIGURING
THE
S
WITCH
3-142
Displaying the Address Table
The Dynamic Address Table contains the MAC addresses learned by
monitoring the source address for traffic entering the switch. When the
destination address for inbound traffic is found in the database, the
packets intended for that address are forwarded directly to the associated
port. Otherwise, the traffic is flooded to all ports.
Command Attributes
• Interface – Indicates a port or trunk.
• MAC Address – Physical address associated with this interface.
• VLAN – ID of configured VLAN (1-4093).
• Address Table Sort Key – You can sort the information displayed
based on MAC address, VLAN or interface (port or trunk).
• Dynamic Address Counts – The number of addresses dynamically
learned.
• Current Dynamic Address Table –
Lists all the dynamic addresses.
To Next Page
Loading...
