VLAN C
OMMANDS
4-213
Command Usage
Promiscuous ports assigned to a primary VLAN can communicate with
any other promiscuous ports in the same VLAN, and with the group
members within any associated secondary VLANs.
Example
show vlan private-vlan
Use this command to show the private VLAN configuration settings on
this switch.
Syntax
show vlan private-vlan mapping [community | primary]
• community – Displays all community VLANs, along with their
associated primary VLAN and assigned host interfaces.
• primary – Displays all primary VLANs, along with any assigned
promiscuous interfaces.
Default Setting
None
Command Mode
Privileged Executive
Example
Console(config)#interface ethernet 1/2
Console(config-if)#switchport private-vlan mapping 2
Console(config-if)#
Console#show vlan private-vlan
Primary Secondary Type Interfaces
-------- ----------- ---------- ------------------------------
5 primary Eth1/ 3
5 6 community Eth1/ 4 Eth1/ 5
Console#
To Next Page
Loading...
