SMC Networks TigerSwitch SMC6128L2

C ONFIGURING THE S WITCH
3-198
• Remove Class – Removes the selected class.
Class Configuration
• Class Name – Name of the class map. (Range: 1-16 characters)
• Type – Only one match command is permitted per class map, so the
match-any field refers to the criteria specified by the lone match
command.
• Description – A brief description of a class map.
(Range: 1-64 characters)
• Add – Adds the specified class.
• Back – Returns to previous page without making any changes.
Match Class Settings
• Class Name – List of the class maps.
• ACL List – Name of an access control list. Any type of ACL can be
specified, including standard or extended IP ACLs and MAC ACLs.
(Range: 1-16 characters)
• IP DSCP – A DSCP value. (Range: 0-63)
• IP Precedence – An IP Precedence value. (Range: 0-7)
• VLAN – A VLAN. (Range:1-4094)
• Add – Adds specified criteria to the class. Up to 16 items are permitted
per class.
• Remove – Deletes the selected criteria from the class.
Web – Click QoS, DiffServ, then click Add Class to create a new class, or
Edit Rules to change the rules of an existing class.