104
D717 User Manual Software Update
Software update
Manual update
1. Open a browser and enter the address https://service.snom.com/display/wiki/
Firmware+Update+Center.
2. Click on the type of phone to be updated.
3. Click on the firmware version currently running on your phone.
4. Right-click on the link of the firmware version you want to update to.
5. Click on Copy link location or Copy link address (wording depends on your browser).
6. Open the phone’s web interface > Software Update page.
7. In the Manual Software Update area, paste the link into the text field of "Firmware".
8. Click on Load. The phone begins to reboot.
9. If the phone asks “Reboot?”, press .
10. DO NOT DISCONNECT THE POWER WHILE THE PHONE IS REBOOTING!
Auto provisioning
For more information, see our web page http://wiki.snom.com/Features/Mass_Deployment.
1. Open the phone’s web interface > Advanced Settings page > Update tab.
2. Please click on the radio button of each line and read the information on each setting on its
Wiki page before you configure the setting.
3. Click on Apply. If you have the changed the setting URL and/or the PnP configuration, a reboot is
required before they will take eect.
To Next Page
Loading...
