Snom D717 - Call Forwarding

To Next Page

To Previous Page

D717 User Manual Customizing the Phone Settings

Call forwarding

This feature automatically redirects all or certain incoming calls to another phone or a mailbox.

Call forwarding is conﬁgured for each identity separately. On the web interface, the settings are

conﬁgured on the Conﬁguration identity (1-6) pages. If you set call forwarding on the phone, the

settings are applied to the identity selected as the outgoing identity at the time of the conﬁguration;

the conﬁguration must be repeated with the same or dierent settings for each identity.

Always

All incoming calls are forwarded to the number of the phone, extension, or mailbox speciﬁed as this

function's target.

When busy

Calls ringing while the phone is busy are forwarded to the number of the phone, extension, or mailbox

speciﬁed as this function's target.

After timeout

When a call starts ringing, the phone will wait for the number of seconds speciﬁed as wait time. If the

call has not been accepted by the end of this time period, it is forwarded to the number of the phone,

extension, or mailbox speciﬁed as this function's target.

Conﬁguring the settings on the phone: See "Making/changing the settings on the phone

and turning on call forwarding" on page 68.

Conﬁguring the settings on the web interface

If your internet telephony provider or your PBX uses codes to turn functions on and o, refer to their

manuals for the codes to enter in "On Code"/"O Code" text ﬁelds or ask your administrator.

Setting forwarding numbers

• Forwarding all incoming calls:

1. Open Conﬁguration Identity page > Features tab > Call Forwarding > Always.

2. Type the phone number in the "Target" text ﬁeld. Type each number the way it needs to be

dialed by the phone, without spaces or punctuation between the digits.

3. Click on Apply and Save.

• Forwarding incoming calls when the phone is busy:

1. Open Conﬁguration Identity page > Features tab > Call Forwarding > Busy .

2. Type the phone number in the "Target" text ﬁeld. Type each number the way it needs to be

dialed by the phone, without spaces or punctuation between the digits.

3. Click on Apply and Save.

Other manuals for Snom D717