Snom D717 - Call Completion

97
D717 User Manual Customizing the Phone Settings
• Forwarding incoming calls when they are not answered:
1. Open Configuration Identity page > Features tab > Call Forwarding > Timeout.
2. Type the number of seconds into the text field of "Timeout (sec)". If an incoming call hasn't
been answered when the time has elapsed, the call will be forwarded to the phone number
entered as target.
3. Type the phone number in the "Target" text field. Type each number the way it needs to be
dialed by the phone, without spaces or punctuation between the digits.
4. Click on Apply and Save.
Turning call forwarding on
1. Web interface > Configuration Identity page > Features tab > Call Forwarding.
2. Click the on radio button of the forwarding event (Always, Busy, Timeout).
3. Click on Apply and Save.
Turning call forwarding o
1. Web interface > Configuration Identity page > Features tab > Call Forwarding.
2. Click the o radio button of the forwarding event (Always, Busy, Timeout).
3. Click on Apply and Save.
Call completion
On Snom phones call completion means that when a called number is busy or not available, your
phone will call you back as soon as the dialed number is not busy anymore or available again. The
factory default setting is "o". For more information, see "Call completion" on page 53.
Note: This function must be supported by your VoIP provider and/or your PBX.
On the phone
1. Press and select Call Features > Outgoing Calls > Call Completion.
2. Press to change the setting from o to on and vice versa.
3. Press briefly to return to the Call Features menu, press for two seconds to return to the idle
screen.
On the web interface
1. Open the phone's web interface > Advanced Settings page > Behavior tab > Phone Behavior
section.
2. To enable Call completion, click the radio button on.
3. Click Save.