59
D717 User Manual Using the Phone
In Fig. 3–5 there are two calls on hold. Fig. 3 shows the connected call, Fig. 4–5 the calls on hold.
Press the function keys underneath / to show the call not currently on screen.
Fig. 3 Fig. 4 Fig. 5
• When the connected call is on-screen, you can transfer it to a third party by pressing (see
"Transferring calls" on page 60) or terminate it by pressing .
• When a held call is on-screen, press to connect to it and put the currently connected call on
hold.
Conference
The maximum number of participants is three.
Note: This section refers to phone-based conferences. For the number of participants
in server-based conferences and how to set up and join them, please check with your
network administrator or your VoIP provider.
Initiating a conference
1. Call the first intended participant and put him or her on hold.
2. Call the second intended participant.
Fig. 1
3. Press to start the conference.
Conference screen navigation
Your input on the phone's keys will aect the caller/callee(s) or the entire conference shown in the
contact area of the display. Example: A conference with three participants, including yourself. After
you have pressed (Fig. 1) to start the conference, the names, if available, and/or phone numbers
of the other participants are shown on-screen (Fig. 2 - 4). Fig. 2 shows the conference screen, i.e., all
of your conference partners while Fig. 3 and 4 show the screens for individual participants.
To Next Page
Loading...
