Snom D717 - Selected Examples for Function Key Programming

79
D717 User Manual Configuring the Function Keys
When D7 Expansion Modules are connected to the phone, their function keys are added to the
function key page of the phone (Fig. 3, above). The settings of their function keys are stored on the
phone and, unless deleted prior to the module's disconnection, remain available to be used when the
same or any other module of the same type is connected to the phone.
The keys on the second and third module can be used only when a second and third module,
respectively, are connected to the phone. Expansion module keys are not shown in the phone menu or
on the function keys page when no expansion module is connected.
For more information, see "Example 2, Extension monitoring and call pick-up on D7 expansion
module" on page 81 and the D7 user manual available at http://wiki.snom.com/Snom_D7/
Documentation.
Selected examples for function key programming
This chapter will show you a few examples for customizing function key settings to your needs and
preferences, using the phone's web interface:
• First example: Extension monitoring and call pickup via one of the phone's freely programmable
and self-labeling function keys with LED
• Second example: Extension monitoring and call pickup via a function key on the D7 expansion
module
• Third example: Speed dialing with a freely programmable function key with LED
• Fourth example: Changing setting of context-sensitive key