Snom D717 - Page 57

57
D717 User Manual Using the Phone
Fig. 4
◦ Press to return to the Connected screen with your current connection (Fig. 2 and - if
there is more than one call waiting - Fig. 7).
Note: Pressing and will aect the call shown on the display, i.e., your current
connection in Fig. 1, 3, and 5, the call waiting in Fig. 2, 6, and 7, and the call on hold in
Fig. 4.
◦ If there is more than one call waiting (Fig. 5, 6, and 7), press the keys , , or ,
respectively, to bring them on-screen and to return to the connected call.
Fig. 5 Fig. 6 Fig. 7
• If you do not wish to accept the waiting call, you can:
◦ ignore the announcement. If you have set call forwarding when busy, the call will be
transferred to that phone.
◦ reject the incoming call by putting the Call waiting screen on the display and pressing .
The caller hears the busy signal. Pressing for three seconds will also put the caller on the
"Deny" list of the phone's directory. Future calls from this number will not ring on the phone;
the caller hears the busy signal. For more information on the "Deny" list and how to remove
entries from it, see "Contact Types" on page 42.