SNR S2940-8G-v2 User Manual

SNR S2940-8G-v2 Switch Configuration Guide
DHCP Configuration
2. Configure DHCP Address pool
(a) Create/Delete DHCP Address pool
Command Explanation
Global Mode
ip dhcp pool <name>
no ip dhcp pool <name>
Configure DHCP Address pool. The no operation
cancels the DHCP Address pool.
(b) Configure DHCP address pool parameters
Command Explanation
DHCP Address Pool Mode
network-address <network-number>
[mask | prefix-length]
no network-address
Configure the address scope that can be allocated to
the address pool. The no operation of this command
cancels the allocation address pool.
default-router [<address1> [<ad-
dress2> [...<address8>]]]
no default-router
Configure default gateway for DHCP clients. The no
operation cancels the default gateway.
dns-server [<address1> [<address2>
[...<address8>]]]
no dns-server
Configure DNS server for DHCP clients. The no com-
mand deletes DNS server configuration.
domain-name <domain>
no domain-name
Configure Domain name for DHCP clients; the 'no
domain-name' command deletes the domain name.
netbios-name-server [<address1>
[<address2> [...<address8>]]]
no netbios-name-server
Configure the address for WINS server. The no oper-
ation cancels the address for server.
netbios-node-type { b-node | h-node |
m-node | p-node | <type-number> }
no netbios-node-type
Configure node type for DHCP clients. The no opera-
tion cancels the node type for DHCP clients.
bootfile <filename>
no bootfile
Configure the file to be imported for DHCP clients on
boot up. The no command cancels this operation.
next-server [<address1> [<address2>
[...<address8>]]]
no next-server [<address1> [<ad-
dress2> [...<address8>]]]
Configure the address of the server hosting file for im-
porting. The no command deletes the address of the
server hosting file for importing.
option <code> { ascii <string> | hex
<hex> | ipaddress <ipaddress> }
no option <code>
Configure the network parameter specified by the op-
tion code. The no command deletes the network pa-
rameter specified by the option code.
lease { days [hours][minutes] | infinite
}
no lease
Configure the lease period allocated to addresses in
the address pool. The no command deletes the lease
period allocated to addresses in the address pool.
max-lease-time { [<days>] [<hours>]
[<minutes>] | infinite }
no max-lease-time
Set the maximum lease time for the addresses in the
address pool; the no command restores the default
setting.
221

SNR S2940-8G-v2 Specifications

General

Brand	SNR
Model	S2940-8G-v2
Category	Switch
Language	English