SNR S2940-8G-v2 Switch Configuration Guide
sFlow Configuration
62.4 sFlow Troubleshooting
In configuring and using sFlow, the sFlow server may fail to run properly due to physical connection
failure, wrong configuration, etc. The user should ensure the following:
• Ensure the physical connection is correct
• Guarantee the address of the sFlow analyzer configured under global or port mode is acces-
sible.
• If traffic sampling is required, the sampling rate of the interface must be configured
• If statistic sampling is required, the statistic sampling interval of the interface must be con-
figured
402
To Next Page
Loading...
General