SNR S2940-8G-v2 User Manual

SNR S2940-8G-v2 Switch Configuration Guide
DHCPv6 Configuration
1. To enable/delete DHCPv6 service
Command Explanation
Global Mode
service dhcpv6
no service dhcpv6
To enable DHCPv6 service.
2. To configure prefix delegation pool
Command Explanation
Global Mode
ipv6 local pool <poolname>
<prefix | prefix-length>
<assigned-length>
no ipv6 local pool <poolname>
To configure prefix delegation pool.
3. To configure DHCPv6 address pool
(a) To achieve/delete DHCPv6 address pool
Command Explanation
Global Mode
ipv6 dhcp pool <poolname>
no ipv6 dhcp pool <poolname>
To configure DHCPv6 address pool.
(b) To configure prefix delegation pool used by DHCPv6 address pool
Command Explanation
DHCPv6 address pool Configuration Mode
prefix-delegation pool <pool-
name> [lifetime <valid-time>
<preferred-time>]
no prefix-delegation pool <pool-
name>
To specify prefix delegation pool used by DHCPv6 address
pool, and assign usable prefix to client.
(c) To configure static prefix delegation binding
Command Explanation
DHCPv6 address pool Configuration Mode
prefix-delegation <ipv6-
prefix/prefix-length> <client-
DUID> [iaid <iaid>] [lifetime
<valid-time> <preferred-time>]
no prefix-delegation <ipv6-
prefix/prefix-length> <client-
DUID> [iaid <iaid>]
To specify IPv6 prefix and any prefix required static binding
by client.
231

SNR S2940-8G-v2 Specifications

General

Brand	SNR
Model	S2940-8G-v2
Category	Switch
Language	English