SNR S2940-8G-v2 Switch Configuration Guide
Basic Switch Configuration
authentication ip access-class {
<num-std> | <name> }
no authentication ip access-
class
Binding standard IP ACL protocol to login with Tel-
net/SSH/Web; the no form command will cancel the binding
ACL.
authentication ipv6 access-class
{ <num-std> | <name> }
no authentication ipv6 access-
class
Binding standard IPv6 ACL protocol to login with Tel-
net/SSH/Web; the no form command will cancel the binding
ACL.
authentication line { console | vty
| web } login method1 [method2
…]
no authentication line { console |
vty | web } login
Configure authentication method list with telnet.
authentication enable method1
[method2 …]
no authentication enable
Configure the enable authentication method list.
authorization line { console | vty
| web } exec method1 [method2
…]
no authorization line { console |
vty | web } exec
Configure the authorization method list with telnet.
authorization line vty command
<1-15> { local | radius | tacacs }
( none | )
no authorization line vty com-
mand <1-15>
Configure command authorization manner and authoriza-
tion selection priority of login user with VTY (login with Telnet
and SSH). The no command recovers to be default manner.
accounting line { console | vty
} command <1-15> { start-stop
| stop-only | none } method1
[method2…]
no accounting line { console | vty
} command <1-15>
Configure the accounting method list.
Admin Mode
terminal monitor
terminal no monitor
Display debug information for Telnet client login to the
switch; the no command disables the debug information.
show users Show the user information who logs in through
telnet or ssh. It includes line number, user name and user
IP.
clear line vty <0-31> Delete the logged user information on the appointed line,
force user to get down the line who logs in through telnet or
ssh.
25
To Next Page
Loading...
General