EasyManuals Logo

SNR S2940-8G-v2 User Manual

SNR S2940-8G-v2
420 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #302 background imageLoading...
Page #302 background image
SNR S2940-8G-v2 Switch Configuration Guide
Self-defined ACL Configuration
2. Configure user-defined ACL
(a) Configure standard user-defined ACL
Command Explanation
Global Mode
userdefined-access-list standard <num> {deny | permit} {any-
source-mac | { host-source-mac <host_smac>} | {<smac>
<smac-mask>}} {any-destination-mac | {host-destination-mac
<host_dmac>} | {<dmac> <dmac-mask>}} {untagged-eth2 |
tagged-eth2 [cos <value> [<mask>]] [vlanId <value> [<mask>]]
| untagged-802-3 | tagged-802-3 [cos <value> [<mask>]]
[vlanId <value> [<mask>]]} [window1 <value> <mask>] [window2
<value> <mask>] [window3 <value> <mask>] [window4 <value>
<mask>] [window5 <value> <mask>] [window6 <value> <mask>]
[window7 <value> <mask>] [window8 <value> <mask>] [win-
dow9 <value> <mask>] [window10 <value> <mask>] [window11
<value> <mask>]
no userdefined-access-list <num>
Create a numbered stan-
dard self-defined ACL. If
the standard self-defined
ACL exists, then a rule
will be added to the ACL.
The no command deletes
a numbered standard self-
defined ACL.
(b) Configure extended user-defined ACL
Command Explanation
Global Mode
userdefined-access-list extended <num> {deny | permit}
{untagged-eth2 | tagged-eth2 [cos <value> [<mask>]] [vlanId
<value> [<mask>]] | untagged-802-3 | tagged-802-3 [cos
<value> [<mask>]] [vlanId <value> [<mask>]]} [swindow1
<value> <mask>] [swindow2 <value> <mask>] [lwindow1
<value> <mask>] [lwindow2 <value> <mask>] [lwindow3
<value> <mask>] [lwindow4 <value> <mask>] [lwindow5
<value> <mask>] [lwindow6 <value> <mask>] [lwindow7
<value> <mask>] [lwindow8 <value> <mask>]
no userdefined-access-list <num>
Create a numbered ex-
tended self-defined ACL. If
the extended self-defined
ACL exists, then a rule
will be added to the ACL.
The no command deletes
a numbered extended self-
defined ACL.
3. Bind user-defined ACL to specified port
Command Explanation
Physical Port Mode
[no] userdefined access-group <name> {in}
[traffic-statistic]
Apply userdefined-access-list to one direction of
the port. Decide whether the statistical counter
should be added to the ACL according to the op-
tions. The no command deletes the configuration
bound to the port.
302

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SNR S2940-8G-v2 and is the answer not in the manual?

SNR S2940-8G-v2 Specifications

General IconGeneral
BrandSNR
ModelS2940-8G-v2
CategorySwitch
LanguageEnglish