EasyManuals Logo

SNR S2940-8G-v2 User Manual

SNR S2940-8G-v2
420 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
SNR S2940-8G-v2 Switch Configuration Guide
Basic Switch Configuration
(a) Start FTP server
(b) Configure FTP login username and password
(c) Modify FTP server connection idle time
(d) Shut down FTP server
3. TFTP server configuration
(a) Start TFTP server
(b) Configure TFTP server connection idle time
(c) Configure retransmission times before timeout for packets without acknowledgement
(d) Shut down TFTP server
1. FTP/TFTP client configuration
(a)FTP/TFTP client upload/download file
Command Explanation
Admin Mode
copy <source-url> <destination-url> [ascii |
binary]
FTP/TFTP client upload/download file.
(b)For FTP client, server file list can be checked.
Command Explanation
Admin Mode
ftp-dir <ftpServerUrl> For FTP client, server file list can be
checked. FtpServerUrl format looks like:
ftp://user:password@IPv4|IPv6 Address.
2. FTP server configuration
(a)Start FTP server
Command Explanation
Global Mode
ftp-server enable
no ftp-server enable
Start FTP server, the no command shuts down
FTP server and prevents FTP user from logging
in.
(b)Configure FTP login username and password
Command Explanation
Global Mode
ip ftp username <username> password [0 |
7] <password>
no ip ftp username <username>
Configure FTP login username and password;
this no command will delete the username and
password.
40

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SNR S2940-8G-v2 and is the answer not in the manual?

SNR S2940-8G-v2 Specifications

General IconGeneral
BrandSNR
ModelS2940-8G-v2
CategorySwitch
LanguageEnglish