SNR S2940-8G-v2 User Manual

SNR S2940-8G-v2 Switch Configuration Guide
sFlow Configuration
2. Configure the sFlow proxy address
Command Explanation
Global Mode
sflow agent-address <collector-
address>
no sflow agent-address
Configure the source IP address applied by the sFlow proxy;
the no form of the command deletes this address.
3. Configure the sFlow proxy priority
Command Explanation
Global Mode
sflow priority <priority-vlaue>
no sflow priority
Configure the priority when sFlow receives packet from the
hardware; the no sflow priority command restores to the
default
4. Configure the packet head length copied by sFlow
Command Explanation
Port Mode
sflow header-len <length-vlaue>
no sflow header-len
Configure the length of the packet data head copied in the
sFlow data sampling; the no form of this command restores
to the default value.
5. Configure the max data head length of the sFlow packet
Command Explanation
Port Mode
sflow data-len <length-vlaue>
no sflow data-len
Configure the max length of the data packet in sFlow; the
no form of this command restores to the default.
6. Configure the sampling rate value
Command Explanation
Port Mode
sflow rate {input <input-rate> |
output <output-rate >}
no sflow rate [input | output]
Configure the sampling rate when sFlow performing hard-
ware sampling. The no command deletes the rate value.
7. Configure the sFlow statistic sampling interval
Command Explanation
Port Mode
sflow counter-interval <interval-
vlaue>
no sflow counter-interval
Configure the max interval when sFlow performing statistic
sampling. The no form of this command deletes
400

SNR S2940-8G-v2 Specifications

General

Brand	SNR
Model	S2940-8G-v2
Category	Switch
Language	English