SolarMax SM30HT4 - Page 46

46
Function / parameter Description Unit / status
PUL Active power limitation depending on mains voltage -
P U L-E N A PUL function status Disabled/enabled
P U L-AVG M OT Average check duration s
P U L-V TH R Limit value V
P U L-R D N Reduction of active power % of Pac nom/
min
PUL-RNC Increase to rated output power % of Pac nom/
min
PFLM2 P(f) mode 2 -
PFLM2-STRTFQ Start frequency Hz
PFLM2-RDN Reduction of active power
% of P
M
/Hz
PFLM2-RNC Increase to rated output power % of Pac nom/
min
PFLM3 P(f) mode 3 -
PFLM3-STRTFQ Start frequency Hz
PFLM3-RDN Reduction of active power
% of P
M
/Hz
PFLM3-RNC Increase to rated output power % of Pac nom/
min
PFLM3-UFQTHR Maximum permissible mains frequency Hz
PFLM3-LFQTHR Minimum permissible mains frequency Hz
PFLM3-UVTHR Maximum permissible mains voltage V
PFLM3-LVTHR Minimum permissible mains voltage V
PFLM3-MOT Duration of check s
PFLM4 P(f) mode 4 -
PFLM4-STRTFQ Start frequency Hz
PFLM4-RDN Reduction of active power
% of P
M
/Hz
PFLM4-RNC Increase to rated output power % of Pac nom/
min
PFLM4-UFQTHR Maximum permissible mains frequency Hz
PFLM4-LFQTHR Minimum permissible mains frequency Hz
PFLM4-UVTHR Maximum permissible mains voltage V
PFLM4-LVTHR Minimum permissible mains voltage V
PFLM4-MOT Duration of check s
Reactive power
Functions and parameters of the "Reactive power" sub-menu:
Function / parameter Description Unit / status
QMO-AM Reactive power control 0=OFF
QMCQ Reactive power mode "Q" (xed reactive power) -
not until FW rel. 1.1