Solartron 1260 - Page 27

6.
Finally, fit
the
instrument into
the rack,
as
follows:
a)
Offer the instrument up to
the rack
and feed
the inner telescopic slide
members
into the outer
members,
pushing the
instrument into the rack
until the
locking
catches engage
and lock.
b)
Depress
both catches and
push the instrument
fully
into the rack, ensuring
that
no cables are trapped.
c)
Tighten
the
screws
on the
outer slide
members in the following
order:
i) the M5 screws securing
the rear
bracket
to the
rack,
ii) the M5 screws
securing the front
bracket
to the rack,
iii) the
8-32
UNC
screws
securing
the rear
bracket to
the outer slide
member.
JWS/1255/2
2.13