Solid State Logic AWS DELTA 916 User Manual

MIXING CONFIGURATIONS
When mixing in In-line mode, the secondary channel path can be employed either as an additional send from the channel,
as the right input of a stereo signal, or as an independent additional input path, allowing up to 48 signals to be mixed on
the console. Because channels are independently configurable, additional inputs might be assigned to channels not requiring
extra sends, allowing those signals that do require the extra send to take advantage of both channel paths.
BASIC STEREO MIXDOWN
Basic stereo mixdown uses the channel in Stereo mode:
ADDITIONAL SEND MIXING
In the Additional Send configuration (In-line Mix mode with the in-channel RETURN switch unselected), the second
channel path can be sourced pre- or post-fader, and each of the sends can be switched between them. This allows for a
high level of flexibility of send leveling and automation. The channel’s signal processing is applied to both channel paths.
The V-pot controls the additional send level and the fader the main channel contribution to the Mix and/or Record busses.
AWS 948 Tutorial
Page 2b-6 AWS δelta Owner’s Manual
Chan 1
Input:
Line In
Left &
Line In
Right
Signal
Processing
Channel Path 1L
Channel Path 1R
Stereo
DAW
track
out
External processing
Monitoring
DAW
Stereo
Master
FX
Sends
Printed
stem
FX Rtns
Channel Path A
DAW
track
out
Channel Path B
External processing
Signal
Processing
FX Rtns
DAW
Stereo
Master
Mix Bus
Track Bus 1
(1&2 for Stereo)
FX Snds
Channel 1
Input:
Line In L
Monitoring
Mix Bus

Solid State Logic AWS DELTA 916 Specifications

General

Brand	Solid State Logic
Model	AWS DELTA 916
Category	Recording Equipment
Language	English