STR-DA2800ES
164
Pin No. Pin Name I/O Description
77 to 80 TXD0_3 to TXD0_0 I Digital data input from the audio/video signal decoder
81 MII0_TXCLK I Serial data transfer clock signal input from the audio/video signal decoder
82 VCC - Power supply terminal (+1.8V)
83 GND - Ground terminal
84 RXDV0 O Data valid signal output to the audio/video signal decoder
85 to 88 RXD0_3 to RXD0_0 O Digital audio/video signal output to the audio/video signal decoder
89 MII0_RXCLK O Serial data transfer clock signal output to the audio/video signal decoder
90 COL0 O Collision detection signal output to the audio/video signal decoder
91 LED_SEL [0] I LED output mode setting terminal Not used
92 LED_SEL [1] I LED output mode setting terminal Fixed at “L” in this unit
93 RESETB I Reset signal input from the main system controller and reset signal generator “L”: reset
94 VCC_SRAM - Power supply terminal (+1.8V)
95 GND_SRAM - Ground terminal
96 LED_LINK [0] O LED link/active signal output terminal Not used
97 LED_SPEED [0] O LED speed signal output terminal Not used
98 VCC_O_1 - Power supply terminal (+3.3V)
99 GND_O_1 - Ground terminal
100 LED_FULL [0] O LED full/half/link signal output terminal Not used
101 LED_LINK [1] O LED link/active signal output to the LAN connector for 4
102 LED_SPEED [1] O LED speed signal output to the LAN connector for 4
103 LED_FULL [1] O LED full/half/link signal output to the LAN connector for 4
104 LED_LINK [2] O LED link/active signal output to the LAN connector for 3
105 LED_SPEED [2] O LED speed signal output to the LAN connector for 3
106 LED_FULL [2] O LED full/half/link signal output to the LAN connector for 3
107 LED_LINK [3] O LED link/active signal output to the LAN connector for 2
108 LED_SPEED [3] O LED speed signal output to the LAN connector for 2
109 LED_FULL [3] O LED full/half/link signal output to the LAN connector for 2
110 LED_LINK [4] O LED link/active signal output to the LAN connector for 1
111 LED_SPEED [4] O LED speed signal output to the LAN connector for 1
112 LED_FULL [4] O LED full/half/link signal output to the LAN connector for 1
113 MDC1 I Not used
114, 115 VCC - Power supply terminal (+1.8V)
116 CRS2 I Not used
117, 118 GND - Ground terminal
119 CRS_EN I Not used
120 REG_OUT O Not used
121 GND - Ground terminal
122 X2 O System clock output terminal (25 MHz)
123 OSCI (X1) I System clock input terminal (25 MHz)
124 VCC - Power supply terminal (+1.8V)
125 NC - Not used
126 AGND - Ground terminal
127, 128 RXIP0, RXIM0 I Digital audio/video signal input terminal Not used
To Next Page
Loading...
