Version 5.2 Sourcefire 3D System Installation Guide 150
Hardware Specifications
Sourcefire 7000 Series Devices
Chapter 6
Use the 70xx Family Copper Link/Activity LEDs table to understand the activity
and link LEDs on the copper interfaces.
Use the 70xx Family Copper Bypass LEDs table to understand bypass LEDs on
the copper interfaces.
The 10/100/1000 management interface is located on the front of the appliance.
The
70xx Family Management Interface LEDs table describes the LEDs
associated with the management interface.
70xx Family Copper Link/Activity LEDs
STATUS DESCRIPTION
Both LEDs off The interface does not have link.
Link amber The speed of the traffic on the interface is 10Mb or
100Mb.
Link green The speed of the traffic on the interface is 1Gb.
Activity blinking
green
The interface has link and is passing traffic.
70xx Family Copper Bypass LEDs
STATUS DESCRIPTION
Off The interface pair is not in bypass mode or has no power.
Steady green The interface pair is ready to enter bypass mode.
Steady amber The interface pair has been placed in bypass mode and is
not inspecting traffic.
Blinking amber The interface pair is in bypass mode; that is, it has failed
open.
70xx Family Management Interface LEDs
LED DESCRIPTION
Left (link) Indicates whether the link is up. If the light is on, the
link is up. If the light is off, there is no link.
Right (activity) Indicates activity on the port. If the light is blinking,
there is activity. If the light is off, there is no activity.
To Next Page
Loading...