www.spacelabshealthcare.com
2-6
91390
QUBE
S ETUP
DVI Digital Video Output
Connector - 29 PIN DVI-D
This DVI-D video connector (P207) is an output to an optional
secondary display. The voltage levels on these connectors are
compatible with the EIA-RS343A standard. The video timing
supports the qube monitor itself. The pinout for this connector is as
follows:
Table 2-4 Pinout for External DVI Connector
Pin # Function Pin # Function Image
PIN 1 TX2N PIN 17 TX0N
PIN 2 TX2P
PIN 18 TX0P
PIN 3 RTN
PIN 19 RTN
PIN 4 NC
PIN 20 NC
PIN 5 NC PIN 21 NC
PIN 6 DDC_CLK
PIN 22 RTN
PIN 7 DDC_DAT
PIN 23 TXCP
PIN 8 NC
PIN 24 TXCN
PIN 9 TX1N
PIN C1 NC
PIN 10 TX1P
PIN C2 NC
PIN 11 RTN
PIN C3 NC
PIN 12 NC
PIN C4 NC
PIN 13 NC
PIN C5A RTN
PIN 14 +5VDC
PIN C5B RTN
PIN 15 RTN
PIN 31 SHIELD
PIN 16 NC
PIN 32 SHIELD
Warning:
Only connect to an approved medical device.
- Common computer equipment may exceed safe leakage current
limits in the patient vicinity.
- Check leakage currents after equipment is interconnected.
To Next Page
Loading...
