www.spacelabshealthcare.com
4-32
91390
QUBE
M AINTENANCE
Figure 4-28 Docking Station Bottom View
3 Remove the docking station cover plate. Set it aside.
4 Remove the connection J70 (docking station release button LED
power) from the docking station PCBA. Refer to Figure 4-29.
5 Remove the seven (7) screws from the monitor docking PCBA.
Refer to Figure 4-29.
Figure 4-29 Docking Station Enclosure
6 To make room to slide out the docking station PCBA, loosen the
six screws on the latch assembly in order. Refer to Figure 4-30 on
page 4-33.
To Next Page
Loading...
