www.spacelabshealthcare.com
5-5
91390 QUBE
TROUBLESHOOTING
The Boot menu appears as shown in Figure 5-3.
Figure 5-3 Boot Menu
Note:
All menu selections are case-sensitive when using a keyboard or
terminal.
The following keys are available in the Boot menu:
? — Provides an explanation of this menu.
@ — Starts the monitoring application.
p — Prints the boot parameters
c — Allows boot parameters to be changed.
P — Allows this monitor to ping the host IP address [host inet
(h)].
m — Requires a data key (Spacelabs Healthcare Field Service
Engineers only). The Memory menu shows (Memory Menu). This
menu has limited value in the field.
N — Allows the node ID to be changed and sets the monitor ID
number in Network Setup.
D — The Main Diagnostic menu shows (Main Diagnostic Menu).
Caution:
Use caution when you do the functions in this menu. The user should only
execute Diagnostics (D) or use the Error Log (E). The rest of the features
are only for qualified Spacelabs Healthcare field service engineers.
To Next Page
Loading...
