9TS 500i
Fastener Thread size For component Tightening
torques
Comment
Nm
Screw M4x12 Sensor / crankcase 2.0 3)
Screw M3x20 Hose clamp, manifold / cylinder 0.5
Screw D5x24 Clamping lever / cast arm 4.0 2)
Nut M8x1 Starter cup / crankshaft 33.0
Screw M8x53 Stud / crankcase 21.0 4)
Screw P6x50 Support / clamp / handlebar / tank
housing
6.0
Screw P6x19 Support / bearing plug antivibration
system
6.0
Screw P6x40 Support / tank housing 6.0
Screw M10x18 Abrasive wheel 30.0
Screw M5x30 Adjusting lever / guard 6.0 2)
Screw M8x24 Adjusting lever / guard / square nut 4.0
Screw M8x17 Adjusting lever / guard / square nut 4.0
M14x1.25 Spark plug 25.0
Screw M4x8 Pan head screw / banjo screw 3.0
1) Loctite 243 medium strength
2) Easy-slide coating with locking serration
3) Microencapsulated with locking serration
4) Microencapsulated
5) Connection between crankshaft and flywheel must be degreased and oil-free
6) Easy-slide coating
To Next Page
Loading...
