Stihl TS 500i - Page 9

8 TS 500i
Fastener Thread size For component Tightening
torques
Comment
Nm
Screw M5x17 Cap, spark plug cover / shroud 4.5
Nut M10x1 L V-belt pulley, front 45.0
Screw P6x40 Clamp / handlebar / tank housing 6.0
Screw P6x26 Clamp / tank housing 6.0
Screw D5x45 Clamp / antivibration system / handlebar
holder
6.0 2)
Screw M5x35x22 Manifold / throttle shutter housing /
cylinder
6.0 2
Screw P6x19 Crankcase / bearing plug antivibration
system
6.0
Screw M5x32x22 Crankcase / cylinder 9.0 2)
Screw M5x20 Crankcase clutch side / fan side 8.0 2)
Screw M5x35x22 Crankcase clutch side / fan side 8.0 2)
Screw P5x16 Bearing plug antivibration system / tank
housing
4.0
Screw M5x20 Fan cover / crankcase 6.0 2)
Screw P6x19 Air baffle / tank housing 6.0
Screw M5x20 Air guide shroud / crankcase 3.0 2)
Screw M4x12 Ground wire / cover / crankcase 4.0 3)
M12x1 L Carrier 40.0
Screw P3x6 Rewind spring / starter cover 0.5
Screw M5x20 Muffler / cylinder 1st stage 2.5 2)
Screw M5x20 Muffler / cylinder 2nd stage 10.0 2)
Screw M5x20 Muffler / crankcase 10.0 2)
Screw G 3/8" Hose connection / solenoid valve 2.0
Screw M5x21 Guard / cast arm 6.0
Nut M8x1 Flywheel / crankshaft 33.0 5)