Special equipment 7
Inductive guidance (IZF)
– Continue towards the wire groove. The
driving speed is automatically reduced.
– When the control system detects the
induction track via the first antenna, the
control system switches to automatic mode.
– An acoustic signal will be hear
d.
– The coloured ring of the steering symbol (4)
changes colour from orange to yellow.
– Continue driving. The truck is driven
automatically along the centre of the wire
groove.
– When both antennas detect t
he induction
track, the wire search is c
omplete and the
Aisle symbol (5) is displa
yed.
– The truck can now be driven at the permis-
sible speed within the racking.
NOTE
The more precisely the driver drives the middle
of the industrial truck onto the wire groove,
the faster the guidance procedure will be
completed. This means that several of the
above steps can be skipped.
Entering the aisle
– Drive the industrial truck into the aisle in
automatic driving mode.
– When the sensor system of the industrial
truck has detected the aisle, the maximum
permissible speed within the aisle is possi-
ble.
523
1 804 2502 EN - 11/2017 103
To Next Page
Loading...
