4 Operation
Driving
Swivelling and sliding the swivel fork 90°
synchronously
This function moves the turret head to the front
position through a synchronised movement
involving shifting and swivelling. This means
that the swivelling function automatically
stops at a swivel angle of 90 and the sideshift
automatically stops in a central position in front
of the cab. This function makes it easier to pick
up loads at the front of the truck.
Option
See the chapter entitled "Special equipment".
Fork cycle
This function enables an increase in handling
performance through automation of load pick
up and load deposit. The details of the fork
cycle function depend on the design of the
industrial truck.
Option
See the chapter entitled "Special equipment".
Hydraulic special functions
Additional hydraulic functions are available
as an optional extras. Buttons (15)(16)(17)
are provided for operation of these additional
functions. See the chapter entitled "Special
equipment".
66 5
231 804 2502 EN - 11/2017
To Next Page
Loading...
Need help?
General
