5 Regular care and maintenance
Maintenance schedule
At operating hours
1000 h 2000 h 3000 h 4000 h 5000 h
Carried out
6000 h 7000 h 8000 h 9000 h 10000 h
MZF: function check.
IZF: check for central positioning and accuracy of the guidance in relationtotheguide
wire.
Steering angle measurement: check the level of play and the condition.
Steering knob, steering wheel: check for ease of movement.
Live ring bearings: check for ease of movement and wear.
Live ring bearings: check the play of the gears.
Steering motor bearings: check for operating noise.
Brake system
Service brake: check for correct operation.
Reverse brake: check for correct operation.
Drive unit: check the condition and thickness of the brake lining. Replace if neces-
sary.
Load wheels: ch
eck the brake clearance by freewheeling.
Load wheels: check the condition and thickness of the brake lining. Replaceifne-
cessary.
Brake lining: blow out abrasion with oil-free air.
Brake retardation values: check after each adjustment (dynometer or retardation
measuring device).
Automatic braking: check the function as per the order.
Inductive transmitter/photo cells: check the function, setting and condition.
Operating devices
Service brake: check for correct operation.
Service brake: check for correct operation.
Operating devices: check the function and condition.
Protective devices: check depending on the equipment. Repair if necessary.
Information signs, warning signs, load capacity diagram: check that they are present
and legible.
Information signs, warning signs, load capacity diagram: replace missing or illegible
labels.
Optional and additional equipment: check the function and condition according to
the order.
E
lectrics, electronics
90 5
231 804 2502 EN - 11/2017
To Next Page
Loading...
