LUCAS
®
3 Chest Compression System – Service Manual
3328798-002, ©2017 Physio-Control, Inc.
Page 32 of 91
Update LUCAS 3 sw 3.0 to LUCAS 3 sw 3.1
Setup
Note. First time the USB programming cable is used on the computer (PC), following has to be done:
1. Connect the USB connector to the PC and let the PC install the driver for the USB programming cable
2. Start the Device manager on the PC
3. Expand Ports and select Properties for the used COM Port
4. Select Port Settings.
To Next Page
Loading...
