Stryker LUCAS 3 Service Manual

LUCAS
®
3 Chest Compression System – Service Manual
3328798-002, ©2017 Physio-Control, Inc.
Page 7 of 91
Configuration Information
This service manual covers the LUCAS
®
3 also known as LUCAS in this manual.
Unless otherwise noted, functions and features are consistent as specified throughout this manual. Differences are
noted as appropriate.
Item Number
Catalog Number
Description
3326785-0## 99576-0000## LUCAS 3, *
3326785-0## 99576-0000## LUCAS 3 version 3.1, *
Note:
# in the dash number of Item Number and Catalog Number is different for each language specification.
* Description contains country specification.
Device Tracking
All performed service where modules are replaced, the serial no./batch no. of each module shall be stated in the
service report. This information is then sent to Physio-Control, Inc., on a monthly basis.
The modules that have traceability are:
• Compression Module
• Electronic PCBs
• Electric Motor
• Battery
• Main Body
• Support Leg
• Hood
• Back plate
Recycling Information
Important!
The Battery used in LUCAS shall be returned to the local recycling station or dealer/distributor for correct recycling.
LUCAS contains of several materials as listed below:
• Polyphthalamide (PPA) with 50% glass fiber
• Polyamide reinforced with 30% glass fiber
• Polycarbonate/Polybutylene Terephthalate
• Polycarbonate
• Polyurethane
• PVC
• POM
• Silicone
• Chloroprene
• Aluminum
• Stainless steel
• Brass
For further recycling information please contact Jolife AB, Sweden.

Stryker LUCAS 3 Specifications

General

Device Type	Chest Compression System
Power Source	Rechargeable Lithium-ion Battery
Compression Depth	5.3 ± 0.2 cm (2.1 ± 0.1 in)
Battery Life	45 minutes of operation
Battery Charge Time	Approximately 4 hours
Operating Modes	Pause
Patient Size	Fits most adult patients
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	–20 to +60 °C (–4 to 140 °F)
IP Rating	IP43
Compression Rate	100 compressions per minute