FCC Notice
The S CLASS™ cutters have been tested and found to comply with the limits for
Class A digital devices, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. The cutters generate, use and
can emit radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of the cutters in a residential area is likely to cause harmful interference,
in which case the user will be required to correct the interference at his own
expense.
Caution!
Changes or modifications not expressly approved by Summa, which is responsible
for FCC compliance, could void the user’s authority to operate this equipment.
DOC Notice
The S CLASS™ cutters do not exceed the Class A limits for radio noise for digital
apparatus set out in the Radio Interference Regulations of the Canadian
Department of Communications.
Notice
Summa reserves the right to modify the information contained in this User Manual
at any time without prior notice. Unauthorized copying, modification, distribution or
display is prohibited. All rights reserved.
Copyright © 2005 Summa bvba
To Next Page
Loading...
