Summa S 75 - Autoload; Language; Panel Units; Recut Offset

S CLASS™ cutter User’s Manual
Detailed Operation 4-6
Language:
This submenu is used to set or modify the dialogue language on the touch screen.
When the machine is new, it asks the user to choose a language. If this setting was
set to the wrong language, it can be changed with this option.
The information on the touch screen can be displayed in English, French, German,
Spanish, Italian, Polish or Dutch.
Press the button, then use
or to set to the desired language.
Press
,
to confirm or to cancel.
The default language is chosen when the cutter is switched on for the first time.
Panel Units:
The setting of these options determines whether the speed and size values are
displayed in the metric measure system or ENG/US measure system.
Press the button, then use
or to set to the desired measure system.
Press
,
to confirm or to cancel.
The panel units are chosen when the cutter is switched on for the first time.
Recut Offset:
The recut offset submenu is used to set or modify the distances between the jobs
when making multiple recuts. This parameter is also used when using the automated
OPOS options.
Press the button, then use
or to set to the desired value.
Press
,
to confirm or to cancel.
The default value is 5mm.
Autoload:
The Autoload option enables the user to the change the vinyl unroll procedure. When
autoload is on, the cutter will automatically unroll the vinyl when needed. When the
autoload option is set off, the operator should manually unroll enough media before
starting to cut.
The default setting is ON. Tracking is not guaranteed when autoload is set to OFF.
Press the button, then use
or to activate or deactivate the autoload
feature.
Press
,
to confirm or to cancel.
Autoload is default activated.
NOTE: Tracking is not guaranteed when autoload is set to OFF.