Summa S 75 - Changing Tool Pressure; Changing User

S CLASS™ cutter User’s Manual
Basic Operation 2-17
2.6.3 Changing tool pressure
Press area 3
The pressure menu will appear on screen, the current pressure is highlighted.
1. Use
or to change the pressure.
The new value (highlighted) will change.
2. Press
to perform the internal tool pressure test (see 1.6.1.1).
3. Press to confirm and leave the tool pressure menu.
4. Press
to leave the pressure unchanged.
2.6.4 Changing user
Press area 4
The different users will appear on screen.
1. Use
or to change user.
2. Press
to confirm the new user.
3. Press
to leave the menu without changing the user.