Summa S 75 - Printing the Graphic

S CLASS™ cutter User’s Manual
Contour Cutting 3-8
3.3.2 Printing the graphic
1. Print the graphic and its markers with a printer (scale = 100%). When printing on a
roll, make sure that the graphic’s Origin marker coincides with the media’s origin
(1).
1
2. Make sure there is at least a 1cm (0.4in) margin on each side of the graphic (2). A
2cm (0.8in) margin is preferable. There must also be a front margin of 1 cm (3).
2
3
3. Leave a margin of at least 4cm (1.6in) following the print when using sheets or
when cutting the print off a roll (4).
4