S CLASS™ cutter User’s Manual
Basic Operation 2-12
10. Press .
The 4 separate speed parameters will now appear on the screen.
NOTE: Velocity is the main speed parameter. The default value for the three other
parameters is AUTO. This means that they are linked to velocity (which is the speed
when the tool is down). These parameters can be set individually, but will then lose
the link with the velocity parameter.
11. Press
, , or to select the parameter
that needs to be changed.
The chosen parameter will appear on screen.
12. Use
or to change the value.
The value (inverse) will change.
13. Press
to confirm the new value. Or Press to exit the menu without
changing the value.
To Next Page
Loading...
