S CLASS™ cutter User’s Manual
Specifications 6-2
• Adjustable knife pressure and offset settings controlled by microprocessor.
• Communication with host computer via standard serial USB 1.1 or RS-232.
• 320 x 240 touch screen panel for convenient operator control.
• Metric or English units.
• User-addressable curve resolution: 0.1 mm, 0.025 mm, 0.001" or 0.005".
• Menu mode for selection of the cutter's power-up operating configuration.
• Wide variety of cutting speeds (in metric or English units).
• Up to eight separate user configurations stored in non-volatile memory.
• Media support system for automatic loading of media with optional “shuffling” to
guarantee tracking of longer signs.
• Automatic media pull from roll.
• Media sensing.
• Concatenation and curve smoothing to obtain better cut quality.
• Multiple recut feature.
• Tool calibration tests.
• Overcut for easy weeding, OptiCut for prolonged drag knife life.
• Stand and basket.
• Automatic cut sheet feature.
To Next Page
Loading...
