SWDE200B Operation & Maintenance Manual
Never enter or leave machine when the
machine is traveling, swinging, or drilling.
1.9 STARTING ENGINE CORRECTLY
The operator must sit on cab seat to start
engine
Standing on the crawler to start engine is not
permitted.
Short circuit start of the engine (including
terminal start) is forbidden.
1.10 NO PASSENGER ALLOWED
When the machine is in operation or traveling,
no passenger is allowed to stay on or in the
machine except the operator.
1.11 AWAY FROM POWER LINE
Any part or load of the machine touching power line will cause human death or GBH
Prohibit machine or its load from operating in the proximity of any power line.
Keep the machine more than 5 meters away from any power line.
1.12 MOVING MACHINE SAFELY
Before the machine travels and swings, know the position of other people.
Before the machine travels or swings, warn other people by tapping the horn.
Hand signals should be used when operation or swinging is made in confined area, which is
agreed upon before machine start-up.
Know that the pedal/control levers are corresponding to the traveling direction before
operating the machine.
★★★★★ When discharging drill mast, make sure that no person front of machine and
To Next Page
Loading...