SWDE200B Operation & Maintenance Manual
7.4.10 Dust Collection System
Laminar flow
dust absorption
core
Exhausting gate
of dust collector
cyclone and
Laminar flow
dust absorption.
Connecting
pipes between
dust catcher and
dust hood
Change immediately when there is leakage
or breakage
7.4.11 Regular Change of Hydraulic Hoses
To promise safe operation, please do daily check (before operating) and regular check. If
there is any question with the parts listed as below, it would result in serious fire damage. It is
difficult to check the following parts to decide if they are worn, aging only with eyes. We
recommend changing the parts at the interval time as following. However, change the parts
immediately once finding there is problem with any of them before operating. When changing
hoses, check the connector if there is deformation, breakage, or damage and change it if
necessary.
Do regular check on all the hoses and change them or tight them to avoid any bad effect.
Consult with the local delegated distributor for correct changing procedures.
Changing Interval Time Recommendation
Part to be changed regularly
Fuel hose(from fuel box to precipitator, from
precipitator to oil-line pump)