SWDE200B Operation & Maintenance Manual
Inspect leakage with cardboard. Pay attention
to protect your hand and body.
If accident occurs, see a doctor at once.
Any liquid penetrating the skin must be
cleaned within a few hours, otherwise it will
cause tissue decay.
1.29 AVOID HEATING NEAR A PRESSURED OIL PIPES
To prevent severe burns, do not weld or
flame cut near pressured oil pipe or other
flammable materials.
A temporary fireproof protection cover
should be provided when welding, flame
cutting or gas welding take place.
1.30 AVOID HEATING FLAMMABLE LIQUID PIPES
Pipes with flammable liquid are not
permitted to be welded. Pipes or hoses must
be cleaned completely with incombustible
solvent should any welding be required on
those pipes.
1.31 REMOVE PAINT BEFORE WELDING OR HEATING
Prevent potential poisonous gas and dust.
When paint is heated up by welding or other
methods, it will produce poisonous gas.
Remove paint by the following methods before
welding or heating:
Wear a regulated mask to prevent inhaling
dust when removing paint with abrasive
To Next Page
Loading...