SWDE200B Operation & Maintenance Manual
paper or sand wheel.
Remove paint with solvent or paint
remover. Clean paint remover with soap
and water and wait for about 15 minutes
for solvent to evaporate before welding.
Paint removal work should be conducted
outdoors or in a well -ventilated area.
1.32 LIQUID DISPOSAL
All fuels, most lubricants, and some coolants are
flammable. These flammable liquids should be stored
away from fire. Do not burn or punch any liquid
containers.
Dispose of fuel carefully; stop engine before
adding fuel; prohibit smoking while adding
fuel. Add fuel outdoors.
Do not put oil-containing rags on the machine
to ensure the machine stays clean.
1.33 CHEMICAL DISPOSAL
Touching harmful chemicals directly will
cause serious injury to the human body. The
chemicals used in this piling rig, such as
lubricant, coolant, paint, and adhesive may be
harmful.
Before using harmful chemicals, check and
understand its danger; know how to use them
safely.
1.34 FIRE PREVENTION
Following these steps to prevent fire:
Prevent fire caused by leakages of fuel,
To Next Page
Loading...