Why is the coolant temperature indicator always at the end of left scale on my SUNWARD Compact Loader?
If the coolant temperature indicator on your SUNWARD Compact Loader is always at the end of the left scale, it could be due to a faulty thermostat or a faulty instrument. You should change both of them.
What to do if charge warming light does not go out on SUNWARD Compact Loader?
If the charge warning light in your SUNWARD Compact Loader doesn't go out when the engine is running, even at high speed, it could be due to: * A faulty alternator: Change it. * Faulty cables: Check and repair them.
Why does my SUNWARD Compact Loader only move at low speed?
If your SUNWARD Compact Loader only moves at low speed, it could be due to a faulty pump. You should check the pump, then repair or replace it as needed.
Why SUNWARD Compact Loader starter pinion engages and disengages?
If the starter pinion engages and disengages while starting the engine of your SUNWARD Compact Loader, it's likely due to insufficient battery charge. Charge the battery.
Why SUNWARD Compact Loader exhaust gases are white or light blue?
If the exhaust gases from your SUNWARD Compact Loader are white or light blue, it could be due to: * Too much oil in the oil pan: Drain some oil. * Unsuitable fuel: Change to the correct fuel.
Why engine oil pressure light does not come on when engine is stopped on SUNWARD SWL3210?
If the engine oil pressure warning light does not come on when the engine is stopped in your SUNWARD Compact Loader, it could be due to: * A faulty bulb: Change the bulb. * A faulty pressure sensor: Change the sensor.
What to do if SUNWARD SWL3210 fuel is completely depleted?
If the fuel is completely depleted in your SUNWARD Compact Loader, it's because the fuel ran out. Refuel and bleed the system before starting the engine.
What to do if the starter doesn't work on my SUNWARD SWL3210 Compact Loader?
If the starter on your SUNWARD Compact Loader doesn't work when you turn the key to the START position, there are a few potential causes. It could be due to faulty cables, so check and repair them. The battery charge might be insufficient, requiring you to charge the battery. Alternatively, the main fuse could be faulty and needs to be replaced.
How to fix lamps that don't work properly on SUNWARD SWL3210 Compact Loader?
If the lamps on your SUNWARD Compact Loader aren't working correctly even when the engine is running at high speed, it could be due to faulty cables or faulty fan belt tension. Check and repair any loose terminals and connections. Also, inspect the belt tension and adjust it, or replace it if necessary.
Why my SUNWARD Compact Loader does not reach maximum speed?
If your SUNWARD Compact Loader isn't reaching its maximum speed, several factors could be at play. The suction filter might be clogged, requiring a change. The endothermic engine itself might not be reaching its maximum speed, suggesting you change the diesel oil filter and check the injection pump. The auxiliary pump (gear pump) could be faulty, necessitating a check, repair, or change. Insufficient pilot pressure needs to be set. Finally, the pressure relief valve setting might be incorrect and should be set to the rated value.
Illustrates the layout and components of the machine.
Provides key specifications like weight, load, and speed.
Details the physical dimensions of the machine.
Engine specifications, including brand, model, and power.
Electrical system components like battery and alternator.
Location and purpose of the machine's ID plate.
Location of the machine's serial number.
Details of the engine's identification plate.
Location of the chassis serial number.
Describes restrain bar and boom locks safety functions.
Details cabin overturn and radiator protection locks.
Describes seat features and seat belt use.
Describes various warning and status lights on the dashboard.
Details the combined instrument and DPF system control.
Controls machine movement (forward, backward, turning).
Controls boom and working equipment (raise, lower, bucket).
Safety feature to lock joysticks and prevent movement.
Details hand and foot accelerator operations.
Operation of ignition switch and parking brake button.
Controls for cabin climate, lights, flow, speed, and horn.
Describes the FOPS/ROPS cabin and its safety features.
Details using the rear window for emergency egress.
Instructions for fastening, undoing, and checking the seat belt.
Explains auto-levelling and floatation system functions.
Shows the fuse box and lists fuse positions, colors, and circuits.
Lists relays, their functions, and locations in the fuse box.
Location for storing operation and spare parts manuals.
Instructions for opening the engine hood safely.
Instructions for opening the rear cover.
General information about the battery.
Guidelines for the initial 100 operating hours.
Pre-operation checks for safety and readiness.
Procedures for starting the engine.
Procedures to warm up the engine and hydraulic system.
Proper procedures for shutting down the engine.
Guidelines for safe machine movement and cornering.
Maps joystick positions to machine movement directions.
Details counter-rotation maneuver with the left joystick.
Explains joystick operations for boom and bucket.
Steps for loading material on flat surfaces and inclines.
Guides on adjusting bucket angle and depth for digging.
Steps for levelling ground with the bucket.
Steps for parking on level and sloped surfaces.
Explains hand and foot accelerator functions.
Procedures for loading, securing, and unloading.
Guidelines for lifting the machine using eyebolts.
Steps to attach, detach, and adjust the quick coupler.
Operation of auxiliary pedal and high flow system.
Limits for immersion in fluids and towing.
Safe procedures for jump-starting the engine.
Preparing, maintaining, and reactivating after storage.
General recommendations for machine maintenance.
Important tips and precautions for performing maintenance.
Details on fluids, capacities, parts, torque, tools, and lubrication.
Advice and precautions for engine, hydraulic, electrical systems, and seat belt.
Scheduled maintenance tasks based on operating hours.
Common problems and their solutions for electrical, hydraulic, and power systems.
Safety precautions when using optional equipment.
Safety guidelines for installing optional equipment.
Information on the performance of optional equipment.
Procedures for replacing optional equipment.
How to connect standard hydraulic circuits.
How to connect high flow hydraulic circuits.
Schematic of the machine's electrical system.
List of electrical components and their codes.
Schematic of the machine's hydraulic system.
General| Brand | SUNWARD |
|---|---|
| Model | SWL3210 |
| Category | Compact Loader |
| Language | English |
To Next Page
