Sur-Gard System Five - Page 121

7.0 SG-DRL5/DRL5E/DRL5-2L PSTN Line Cards
- 121 -
SG-DRL5 Option 195/295: 5 and 6 Digit Pulse
Default (00)
The Line card cannot distinguish between various 5-digit formats and 6-digit formats. 4/1, 3/2 and 3/1 with checksum cannot be distinguished because
all of them contain a total of 5 digits. 4/2 and 5/1 cannot be distinguished because all of them contain a total of 6 digits.
Value 5 Digit Setting 6 Digit Setting
00 select 4/1 format select 4/2 format
01 select 3/2 format* select 4/2 format
02 select 3/1 checksum format
select 3/1 checksum format special**
select 4/2 format
03 select 4/1 format
select 3/2 format*
select 4/2 format
10 select 3/1 checksum format select 5/1 format***
11 select 3/1 checksum format special** select 5/1 format***
12 select 5/1 format***
13 select 5/1 format***
* NOTE: The printer messages for the 3/2 format are the same as those used for the 4/2 format.
** NOTE: This selects 3/1 checksum only for 40 baud panels, responding on the 2300Hz handshake. For all other panels, this is decoded
as 4-1.
*** NOTE: The printer messages for the 5/1 format are the same as those used for the 4/1 format.
Automation outputs
1RRLLLssssssAAAAsEsssZ[DC4] (4/1)
1RRLLLsssssssAAAsEssYZ[DC4] (3/2)
1RRLLLsssssssAAAsEsssZ[DC4] (3/1)
1RRLLLsssssAAAAAsEsssZ[DC4] (5/1)
Printer outputs
RR-LLL-AAAA-Z-Message (4/1)
RR-LLL-AAA-YZ-Message (3/2)
RR-LLL-AAA-Z-Message (3/1)
RR-LLL-AAAAA-Z-Message (5/1)
SG-DRL5 Option 196/296: 4/1 Extended
Default (00)
Program the 4/1 Extended Option as '01' to enable combining 2 round pairs of 4/1 extended format into 4/2 output for reporting to the automation and
the printer. For example, with Option 196/296 enabled, the security control panel may transmit the following information:
1234 3
1234 3
3333 1
3333 1
The receiver interprets this information as: 1234 31.
The default of '00', means 4/1 Extended is disabled.
SG-DRL5 Option 197/297: 4/2 Extended
Default (00)
Program this option as '01' to combine 2 round pairs of 4/2 extended format into 4/3 output for reporting to the computer and the printer. Program one
of the following:
Example 1:
1234 05
1234 05
0505 16
0505 16
The receiver interprets this information as 1234 516.
Example 2:
1234 03
1234 03
3333 01
3333 01