NOTE: To pair anything with your device, you need to first turn o airplane mode if you
have it on.
3.6. Do Not Disturb mode
The Do Not Disturb mode is a setting that mutes all sounds and vibrations and dims the
screen, making it a very useful option when wearing the watch in, for example, a theater or
any environment where you want the watch to operate as usual, but silently.
To turn
on/o the Do Not Disturb mode:
1. From the watch face, swipe up or press the lower button to open Control panel.
2. Scroll down to Do Not Disturb.
3. Tap on the function name or press the middle button to activate Do Not Disturb mode.
If you have an alarm set, it sounds as normal and disables Do Not Disturb mode unless you
snooze the alarm.
NOTE: Do Not Disturb mode is always disabled in diving mode.
3.7. Stand up reminder
Regular movement is very beneficial for you. With Suunto Ocean, you can activate a stand up
reminder that reminds you to move around a bit if you have been sitting too long.
From the settings, select Activity and toggle on Stand up reminder.
If you have been inactive during 2 consecutive hours, your watch will notify you and remind
you to stand up and move around a bit.
3.8. Find my phone
You can use the Find my phone feature to find your phone when you do not remember where
you left it. Your Suunto Ocean can ring your phone if they are connected. As Suunto Ocean
uses Bluetooth to connect to your phone, the phone needs to be in Bluetooth range so that
the watch can ring it.
To activate the
find my phone feature:
1. From the watch face, press the lower button and open Control panel from the list of
widgets.
2. Scroll down to Find my phone.
3. Start ringing your phone by tapping on the function name or pressing the middle button.
4. Press the lower button to stop ringing.
3.9. Time and date
You can set time and date during the initial startup of your watch. After this, your watch uses
GPS time to correct any
oset.
Suunto Ocean
14
To Next Page
Loading...
